■　SDOP-1017-FBDK　　Automatic heating/cooling 2-stage forming press machine

4-support type

Hydraulic drive: 17 tons (max.)

Diameter of ram of hydraulic cylinder: φ125 x 250(ST)�o
Heating/cooling simultaneous drive pressurized system
Heating system: Electric heating (max. temperature: 250℃)
Cooling system: Water-cooling system
Dimensions of pressurized board: 400 x 400�o
Power source: AC200V 3-phase 50/60Hz 10KVA

Unit dimensions: Approx. (W)1040 x (D)1000 x (H)1400�o
Unit weight : Approx. 900kg

Feature �@

Cooling time, deflation, numbers of shots & time, forming time are completely operated automatically.

Feature �A

Easy operation by liquid crystal programmable terminal (5.7-inch).

Max. welding pressure: 4.8 tons (max.)
Diameter of ram of air cylinder: φ250 x 150(ST)�o
Booster and booster tank are built-in (supply pressure: 5.0kg/c�u)
Pressurizing system: Electric heating system (max. temperature: 200℃)
Temperature control: 2-system (top-bottom heating boards)
Temperature control system: Digital type PID proportional control system

Capacity of heater: AC200V 800W x 2-face
Power source: AC200V 3-phase 50/60Hz 1.8KVA
Unit dimensions: Approx. (W)900 x (D)600 x (H)1450�o
Unit weight : Approx. 420kg

2-head type automatic injection forming machine

Forming die clamping pressure: 5.2 tons (max.)
Welding pressure at injection part: 1.2 tons (max.)

Diameter of ram of hydraulic cylinder:

Clamping die: O100 x 100(ST)�o

Injection: φ50 x 200(ST)

Automatic forming program mechanism is loaded.
Power source: AC100V 3-phase 50/60Hz 8KVA
Unit dimensions: Approx. (W)1310 x (D)770 x (H)1850�o
Unit weight : Approx. 700kg